Στις 12 Απριλίου 2016 και ώρα 16:30 PM - 17:30 PM η SCIA θα διοργανώσει Δωρεάν Διαδικτυακά Σεμινάρια σχετικά με: "Advanced seismic analysis of structures with SCIA Engineer 15" σε 3 γλώσσες.

Δηλώστε συμμετοχή στο Αγγλικό Διαδικτυακό Σεμινάριο.

On April, 12th 2016, SCIA will organise Free Webinars on "Advanced seismic analysis of structures with SCIA Engineer 15" in 3 languages.

You can subscribe to the English (http://bit.ly/1LZKK1o), Dutch (http://bit.ly/1Y0qQEl) or French (http://bit.ly/1Y0qQEl) event.

In many regions in Europe, the assessment of seismic risk and the implications on structural design become increasingly stringent. This is translated in the Eurocode 8 and in national regulations so that more engineers are confronted to seismic analysis than ever before.

SCIA Engineer has been successfully used for seismic analysis since its earliest days and the recent versions again introduced significant improvements in that area.

In this upcoming webinar by our Customer Service Engineer Jad Alam, you will get an overview of the new developments and best practices such as:

• Generation of Newmark combinations
• Modal superposition, Equivalent Lateral Forces and accidental eccentricity
• Best practices to reach 90% of modal mass participation
• Seismic results: signed results and displacements
• Seismic results: storey results and resultant forces
  

This design was made to check the Cold Form Steel (CFS) Wall Stud Modular System (WSMS) of Dr. Dan Dubina research, found at the paper of Joint Research Centre (EU) tested with SCIA Engineer FEM solution by MASES SOFTWARE!!!

We tested the 10m x 12m model.

The file is: jrc_steel_report_2015_07_22.pdf

• http://eurocodes.jrc.ec.europa.eu/
• http://publications.jrc.ec.europa.eu/repository/handle/JRC96658/
  

Feel free to spread the word and download the 3D pdf attached below:

Στις 10 Μαρτίου 2016 και ώρα 11:30 AM - 12:30 PM EET η SCIA θα διοργανώσει Δωρεάν Διαδικτυακά Σεμινάρια σχετικά με: "Plasticity in Steel Plates and Shells in SCIA Engineer" σε 3 γλώσσες.

On 10 March, 2016 at 11:30 AM - 12:30 PM EET SCIA will organise Free Webinars about:
"Plasticity in Steel Plates and Shells in SCIA Engineer" in 3 languages.

Εγγραφείτε για το Αγγλικό - Subscribe to the English Webinar
=> https://attendee.gotowebinar.com/register/6395076659418334980

More: https://www.scia.net/en/support/webinars/plasticity-steel-plates-and-shells


One of the reasons why the steel material is popular is because it exhibits an elasto-plastic behavior that allows extra capacity – through plastic redistribution – when the yield stress is reached locally.

SCIA Engineer 15 now includes a new type of non-linear analysis that supports this behavior: general plasticity of steel plates and shells.

In this upcoming webinar by our Customer Service Engineer Dominique Pipers, will you will get: 

• Background information about the mathematical model
• An overview of the various supported stress-strain laws 
• Several examples to illustrate the impact 
• Modelling tips to handle even connections with bolts and end-plates